-
12x6mm Rectangular section blue silicon strip used in lower tooling plates to support packaging during sealing. Sold by the meter.
-
8x4mm D-Section Blue silicon strip used in lower tooling plates to support packaging during sealing. Sold by the meter.
-
8x6.25mm Rectangular section blue silicon strip used in lower tooling plates to support packaging during sealing. Sold by the meter.
-
Cylindrical Replacement cartridge heater 120V 500W with flying leads. HS34 & HS52 - 2 per machine HS35, HS36 & HS60 - 4 per machine. Cost is shown per heater.
-
Cylindrical Replacement cartridge heater 240V 500W with flying leads. HS34 & HS52 - 2 per machine HS35, HS36 & HS60 - 4 per machine Cost is shown per heater.
-
Cylindrical Replacement cartridge heater 240V 600W with long flying leads for HS55 - 4 per machine.
-
Heater switch fitted to newer bench top machines. Compatible with: HS34, HS35, HS36
-
Heater switch fitted to the front of Small machines and older bench top machines. Compatible with: HS20, HS22, HS25, HS34, HS35, HS36
-
Complete handle assembly (Rod, knob and screw) for HS34C & HS34CF bench top machine.
-
Heater plate return spring fitted to HS35, HS36 and all linear machines. Stronger/heavy type. Compatible with: HS35, HS36, HS52, HS60, HS55
-
Heater plate return spring fitted to HS34 range of machines. Lighter type.
-
Small cylindrical magnets fitted to the film trap magnet bar on HS34 and HS36 machines.
-
Switch fitted to the back of HS34ACF and HS36ACF machines to activate the sealing when the lower tool is pushed in. Also fitted internally in the HS35EC to control the up/down movement. Compatible with: HS34, HS35, HS36
-
Switch fitted to the back of HS35 range of machines to activate the sealing when the lower tool is pushed in. Also fitted to HS52 & HS60 machines to control the index movement on the cam. Compatible with: HS34, HS35, HS36
-
C14 IEC 'Kettle' lead power cord with EU plug. Compatible with: HS34, HS35, HS36
-
C14 IEC 'Kettle' lead power cord with US plug. Compatible with: HS34, HS35, HS36
-
Power socket with main switch fitted to the rear of all bench top machines. Does not include fuse. Compatible with: HS34, HS35, HS36
-
Silicon coated aluminium heated roller used on older HS50 linear machine. This is for a new coated roller, not refurbished or recoated.
-
Solid State Relay fitted to all bench top machines. Compatible with: HS34, HS35, HS36
-
Pre-programmed temperature controller fitted to the front of the Soken HS34ACF, HS35AC, HS35EC and HS36ACF heat sealing machines. Comes programmed with correct default factory settings for these machines. Compatible with: HS34ACF, HS35AC, HS35EC and HS36ACF
-
pre-programmed temperature controller used on older HS40 and HS50 machines. Comes programmed with correct default factory settings for these machines. Compatible with: HS40, HS50
-
pre-programmed temperature controller fitted to the front of HS34C and HS34CF machines. Comes programmed with correct default factory settings for these machines. Compatible with: HS34
-
Tooling spring fitted to all film compatible bench top machines and also used in the cutter assembly on HS55 linear machine. Compatible with: HS34, HS36, HS55
Pack. Seal. Sell.
Soken Engineering Ltd
9 Ardglen Industrial Estate
Whitchurch
Hampshire
RG28 7BB
UK
Send Us a Message Below
Where To Find Us
For privacy reasons Google Maps needs your permission to be loaded.
Copyright © Soken Engineering Ltd | Terms and Conditions
Logo, Branding & Website by SHARED creative
